All data is for information only------(<---links)
	PRODUCT DATA of AA2024-T6, T62

Material	AA2024-T6, T62
Product Type	rod, bar, extrusion, plate
Chemical Composition	4.5% Cu, 1.5% Mg, 0.6% Mn, Rem. Al
Name of Manufacturer	Corus

	EXPERIENCE IN PRACTICE

Development Status	Commercial Product
Cost Range	Very Low
Equivalent Designations	Aluminium-Copper Alloy (ISO AlCu4Mg1), BS L97, BS L98, AFNOR A-U4G1, DIN 1725, AA 2024
Space Experience	Good

	PHYSICAL PROPERTIES

Crystal Structure	Face centered cubic (fcc)
Specific Gravity	2.77
Magnetic Properties	Nonmagnetic

	THERMAL PROPERTIES

Temperature Range

160 °C(maximum)

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

General Corrosion Status	Requires specific corrosion protection
Stress Corrosion Status	Moderate Resistance to SCC: Table 2 Remark: acc. to ECSS-Q-ST-70-36C. Requires Stress corrosion evalution form Test: ECSS-Q-70-37C: Data Quality: Design Data
EMF vs SCE	-0.62 V
Bimetallic Corrosion	Can be used in a non-controlled environment with: Al+alloys, Cd, Sn-Pb alloys, Sn, Pb Can be used in a clean room environment with: as above and Mg, Ni, Monel, Inconel, Ni-Mo alloys, 300 series SS, 400 series SS, Ti and Ti alloys, Zn, Be Needs specific measures: All others Test: ECSS-Q-ST-70C Rev.1 table 5.1: Data Quality: Design Data

	FLUID SYSTEMS COMPATIBILITY

Gaseous Oxygen (GOX)	Meets the mechanical impact requirements. No batch test required
Liquid Oxygen (LOX)	Meets the mechanical impact requirements. No batch test required.
Nitrogen Tetroxide (N2O4)	SCC susceptibility is low and no fluid decomposition
Hydrazine (HDZE)	SCC susceptibility is low and no fluid decomposition

	SPECIAL RECOMMENDATIONS

Special Recommendations

For precipitation hardened parts, heating above the precipitation temperature may result in susceptibility to intergranular and stress corrosion. · The room-temperature aged conditions may become susceptible to intergranular corrosion if the alloy is heated above 65°C.